Manual Remote Start Generator Controller MGC100 for Smartgen

Manual Remote Start Generator Controller MGC100 for Smartgen
Specific data:
Display: LED Nixie Tube
Control panel: PET
Digital input: 4
Relay output: 3 (one transistor output)
AC system: 1P2W/2P3W/3P3W/3P4W
Generator voltage: (15~360)V(ph-N)
Generator frequency: 50/60Hz
DC supply: DC(9-18)V
Case dimensions (mm): 105.8*61*36.6
Panel cutout (mm): 92*44
Operating temperature: (-25~+70)℃
PERFORMANCE AND CHARACTERISTICS:
Multifunctional Nixie tube display, press the button to use;
There is a red LED on the panel to show working and alarm status;
Chose to control Gasoline Genset or Diesel Genset via connection;
Suitable for 3-phase 4-wire, 3-phase 3-wire, 2-phase 3-wire, single-phase 2-wire system (120V/240V) with frequency 50/60/Hz;
Protection function for gen under/over voltage, over speed, failed stop, emergency stop, high water temperature, low oil pressure; when in protection, LED indicates alarm and goes shutdown protection;
The generator rotation speed can be derived from the generator frequency or rotation speed sensor;
4-way digital input (high water temperature input, low oil pressure input, remote input, emergency stop input;
2 relay output (start output, fuel output) and the fuel output is flexible output;
1 flexible transistor output can be set to preheating output, alarm output, power supply to stop output and idle output, etc;
Two start success conditions (rotate speed sensor, generate) can be selected;
Parameter setting: parameters can be changed and stored in internal EEPROM memory and cannot be lost even in the event of a power failure; all can be adjusted using the front panel of the controller;
Modular design, anti-flaming ABS plastic casing, embedded installation method; compact structure with easy assembly.