Hobbywing MAX8 ESC EzRun 4278SD 2250KV G2 Brushless Motor Combo XT90 38010405
Efficient cooling system
The frameless fan design is a patented technology. Rapid transfer of internal heat to the integrated housing radiator is enabled by high airflow from the side of the fan and a copper heat sink on the internal power plate. These are built into highly reliable thermal systems to ensure that the ESC is always in good thermal condition.
1/8th Brushless System Turbo Technology
The ESC is best paired with the EzRun 4278/4268SD G2 motor to achieve maximum performance.
The turbo parameters are adjustable from up to 32 degrees, and the speed is significantly increased by up to 25%.
Capacitor Thermal protection
The capacitor thermal protection implemented by the ESC prevents irreversible damage to the ESC due to overload.
Super Internal BEC
The built-in switch mode BEC has a maximum output of 15A,
and is voltage adjustable from 6V to 8.4V (step: 0.1V). This allows
the use of various standard and high voltage servos.
Built-in capacitor
The ESC has three built-in 680uF capacitors, which increases
performance by 74% (870uF) compared to MAX8 ESC.
The ultra-large capacitors built into the ESC also ensure that users do not need to install external capacitors on their vehicles.
Real-time data and data logging function,
Easy to get power running status. After connecting the OTA module box, turn on the real-time data recording function to access the running status.
New sensor cable interface
The Max8 G2 ESC is equipped with a new type of sensor cable interface.
It is highly recommended to use the motors from Hobbywing, as the waterproof protection level is at the highest level (IP67).
Features:
The ESC uses a special process, along with an innovative waterproof design, to increase waterproofing and dustproofing performance in harsh conditions.
Built-in ultra-powerful switch mode BEC with a continuous current of 6A, (15A max), and support for 6V/7.4V/8.4V output.
Equipped with the most advanced and safe electronic switch.
Supports up to 32-degree turbo timing. When used with the matching motor (such as EZRUN 4278SD), the maximum RPM can be increased by approximately 25%.
Support LED program board, LCD G2 program box, OTA programmer (Note: optional) to set the parameters of ESC.
Multiple protection functions: battery low voltage protection, ESC and motor overheating protection, signal loss protection and power protection.
Specifications:
Scale Vehicle 1/8th
Sensorless and sensorless brushless motor
4S Lipo: KV=3000; 6S Lipo: KV=2400
6V/7.4V/8.4V adjustable, continuous current 10A (switch mode)
60(L)x48(W)x40.5(H)mm
Input: XT90 Output: 6.5mm gold plug (female)