Generator Battery Charger 24V 10A DSE5100D

Generator Battery Charger 24V 10A DSE5100D
It is an electrifying charger with floating shape, it has overcurrent protection,
short circuit protection, not charging and a small electrifying function.
it has a function such as electrifying quickly and safely. You can also regulate the current
automatically depends on different speed the voltage speed increases
from different batteries during work. It represents the latest charging technology.
current: 6-12A
voltage: 12V, 24V
specification:
MODEL
GF240-1B-AM
EXIT
DC VOLTAGE
24 V
SPENDING EFFECT
240W
SCOPE OF CURRENT
0-10
GAIN and NOISE (max.)
240mVp-p
VOLTAGE ADJUSTMENT. RANGE
± 10%
RULE LINE
± 0%
LOAD CONTROL
± 0%
VOLTAGE TOLERANCE
± 0%
CONFIGURATION, TIME OF ENTRY
800 ms, 50 ms at full load
KEEP TIME
60ms
ENTRANCE
VOLTAGE RANGE
90-264VAC 110-260VAC
AC POWER (Typ.)
0.35A / 226VAC 0.18A / 240VAC
FREQUENCY RANGE
47-63Hz
PERFORMANCE (typ.)
82%
CURRENT (Typ.)
WINTER START 15A / 115VAC 30A / 230VAC
CURRENT CURRENT
<0.75mA / 240VAC
PROTECTION
OVERLOAD
115%~135% of rated power; Pulsating hicuup closed, automatic recovery
OVER VOLTAGE
rated output voltage 105% ~ 150% start of overvoltage protection
Protection: burst mode, charging abnormal conditions, automatic recovery
protection against ZWARCIEM
voltage input off and reset for recovery
ENVIRONMENT
WORKING TEMPERATURE.
-0°C ~ +45°C (See derating of load output curve)
WORKING HUMIDITY
20~90% RH without condensation
STORAGE TEMPERATURE, HUMIDITY
-20°C ~ +85°C 10 ~ 95% RH
TEMP. COEFFICIENT
± 0.05%/°C
COOLING METHOD
BASED ON AIR CONVECTION
SAFETY and EMC
SAFETY STANDARDS
EN60950-1 CE approved
KEEP PRESSURE
I/PO/P: 1.5 KVAC, I/P-FG: 1.5 KVAC, O/P-FG: 0.5 KVAC
Insulation resistance
I / PO / P, I / P-FG, O / P-FG: 100 M Ohm / 500VDC
EMI WAY
compliance with EN55022
HARMONIC CURRENT
compliance EN61000-3-2, -3
EMS IMMUNITY
compliance with EN55024
OTHER
TERMINAL CONNECTIONS
MARK: AC-L, AC-N, FG, GND, GND, DC +, DC-
DIMENSION
L200 * * H49.5MM W111
PLAN MATERIAL
Chassis: 2.0mm thickness aluminum; Lid: 0.7mm thick iron (silver colored)