Aftermarket KUTAI GCU-10 automatic generator control unit controller
Replace part number: GCU-10, GCU10
Description:
The GCU-10 is an economical generator controller that provides high reliability for much less than similar controllers. It has adjustable settings to work with all types of generator sets and to match different engine conditions and protections. Optional 12V/24V relay cards (GCU-11R) are available to simplify wiring and connections.
Feature:
Microprocessor-based design
Universal LED graphic interface, displays generator status and errors
Modular design, quick installation
Programmable engine and generator controls Easily adapt to all types of generator sets.
Waterproof front panel with UV protection
Provide idle control for electric governors
Five adjustable time delay potentiometers
Five DIP switches for specification setting
Specification:
DC supply: 9.0 to 36 VDC
Generator input range: Voltage 5~300 VDC Frequency 50~60 Hz
Fuel Solenoid Signal Output: 5 Amp @ 12/24 VDC
Start signal output: 5 Amp @ 12/24 VDC
Heating signal output: 5 Amp @ 12/24 VDC
Accessory "ON" Output: 5 Amp @ 12/24 VDC
No-load conductor capacity: 5 Amp @ 12/24 VDC
Power Consumption: Under 3 VA on Auto
Adjustable timers:
Engine preheating: 2~30 sec.
Start time: 1~15 sec.
Activate to STOP: 1~15 sec.
Engine idle (regulator): 0~300 sec.
Motor cooling: 0~300 sec.
Environment:
Operating temperature: -20~70°C
Relative humidity: max 90%
Protection and alarm status indicators:
Startup failure
High water temperature
Low oil pressure
Overspeed
Underspeed
Emergency stop
Extra Prog. Input
Low battery voltage
Panel installation Cut-Out: 66.0 x 66.0 ±0.5 mm
Dimensions: 72.0 (L) x 72.0 (W) x 50.0 (H) mm
