Aftermarket Deep Sea DSE7510 Generator Controller Auto Start Control Module

Aftermarket Deep Sea DSE7510 Generator Controller Auto Start Control Module
See details:
The DSE7510 is an automatic engine control module, designed to provide advanced load sharing functionality for diesel and gas generators that include electronic and non-electronic engines
The module's load sharing features include automatic synchronization with built-in synchroscope and dead bus shutdown. Direct and flexible outputs from the module are provided to enable connection to the most common speed controllers and automatic voltage regulators (AVRs)
A sophisticated module that monitors a wide range of engine parameters, the DSE7510 will communicate engine shutdowns, warnings and engine status information on the backlit LCD screen, through illuminated LED, to a remote computer, through audible alarms and via SMS alerts (GSM modem required). The module includes RS232 and RS485 ports as well as dedicated terminals for system expansion
DC SUPPLY
CONTINUOUS VOLTAGE
8 V to 35 V continuous
CRANK INTERRUPTION
Can survive 0 V for 50 mS, provided the power supply was at least 10 V before the interruption and the power returns to 5 V. This is achieved without the need for internal batteries
MAXIMUM OPERATING CURRENT
460 mA at 12 V, 245 mA at 24 V
MAXIMUM STANDBY CURRENT
375 mA at 12 V, 200 mA at 24 V
CHARGE FAIL/EXCITATION AREA
0V to 35V
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
EXITS C & D
8 A 250 V (voltage-free)
AUXILIARY OUTPUTS E,F,G
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15V - 333V AC (L-N)
FREQUENCY RANGE
3.5Hz to 75Hz
MAGNETIC SUSPENSION
VOLTAGE RANGE
+/- 0.5V to 70V
FREQUENCY RANGE
10,000Hz (maximum)
BUILT-IN GOVERNOR CONTROL
Fully insulated
Minimum load impedance: 1000Ω
Gain Voltage 0 V - 10 V DC
Offset Voltage +/- 10 V DC
BUILT-IN AVR CONTROL
Fully insulated
Minimum load impedance: 1000Ω
Gain Voltage 0 V - 10 V DC
Offset Voltage +/- 10 V DC
MEASURE
TOTAL
240mm x 172mm x 57mm
9.4" x 6.8" x 2.2"
PANEL CUTOUT
220mm x 160mm
8.7" x 6.3"
MAXIMUM PANEL THICKNESS
8mm
0.3"