Aftermarket Deep Sea DSE7320 064-43445 Generator Auto Start Control Module Plane

Aftermarket Deep Sea DSE7320 064-43445 Generator Auto Start Control Module Plane
Article number:
DSE7320, 7320, 064-43445, 06443445
Introduction:
The DSE7320 is an automatic power failure (Utility) control module suitable for a variety of single, diesel or gas applications.
By monitoring a wide range of engine parameters, the module will display warnings, shutdowns and engine status information on the backlit LCD screen, illuminated LEDs, remote computer and via SMS messages (with external modem).
The DSE7320 will monitor the power grid and includes USB, RS232 and RS485 ports as well as dedicated DSENet® terminals for system expansion.
The module is compatible with electronic (CAN) and non-electronic (magnetic pick-up/generator sensing) motors and offers a large number of flexible inputs, outputs and comprehensive motor protection so that the system can be easily adapted to meet the most demanding industry requirements.
The module has an extensive list of features including enhanced event and performance monitoring and remote communication
The module can be easily configured using the DSE Configuration Suite PC software. Selected front panel editing is also available.
KEY FEATURES
• Protection for reactive power
• 4-line backlit LCD text display
• Five-button menu navigation
• Front panel editing with PIN protection
• Customizable status screens
• Power saving mode
• Support for up to three remote display devices
• 9 configurable inputs
• 8 configurable outputs
• Flexible sender inputs
• Configurable timers and alarms
• 3 configurable maintenance alarms
• Scheduler for multiple dates and times
• Configurable event log (250)
• Control logic facilities
• Easy access diagnostics page
• CAN and Magnetic Pick-up/Alt. sensing
• Fuel consumption monitoring and low fuel alarm
• Charging generator failure alarm
• Manual speed control (on compatible CAN engines)
• Manual control of the fuel pump
• Motor exerciser
•"Protections disabled" function
• KW & kV Ar overload protection
Reverse power (kW & kV Ar) protection
• LED and LCD alarm indication
• Power monitoring (kW h, kV Ar, kV A h, kV Ar h)
• Load switching (load loss and dummy load outputs)
• Automatic load transfer
• Unbalanced load protection
• Independent earth fault tripping
• USB connection
• Backed up real-time clock
• Fully configurable via DSE Configuration Suite PC software
• Configurable display languages
• Remote SCADA monitoring via DSE Configuration Suite PC software
• Selectable RS232 and RS485 communication
• Configurable Gencomm pages
• Advanced SMS messaging (additional external modem required)
• Start and stop function via SMS
• Additional displays to assist with modem diagnostics
• DSENet® expansion compatible
• Built-in PLC editor
IMPORTANT BENEFITS
• 132 x 64 pixel display for clarity
• Real-time clock provides accurate event logging
• Scheduler for multiple dates and times
• Scheduled maintenance periods can be configured to maintain optimal engine performance
• Ethernet communication (via DSE860/865 modules), provides advanced remote monitoring at low cost
• Modules can be integrated into building management systems (BMS)
• Increased input and output expansion capacity via DSENet®
• License-free PC software
• IP65 rating (with included gasket) provides increased resistance to water ingress
• PLC editor allows user-configurable functions to meet specific application requirements
SPECIFICATION
DC SUPPLY
CONTINUOUS VOLTAGE
8 V to 35 V Continuous
CRANK INTERRUPTION
Can survive 0V for 50mS, provided the power supply was at least 10V before the interruption and the power returns to 5V. This is achieved without the need for internal batteries. LEDs and backlight will not be maintained
when cranking.
MAXIMUM OPERATING CURRENT
340 mA at 12 V, 160 mA at 24 V
MAXIMUM STANDBY CURRENT
160 mA at 12 V, 80 mA at 24 V
CHARGE FAIL/EXCITATION AREA
0V to 35V
MAINS (UTILITY)
VOLTAGE RANGE
15V - 333V AC (L-N)
FREQUENCY RANGE
3.5Hz to 75Hz
OUTPUTS
OUTPUT A (FUEL)
15 A DC at supply voltage
OUTPUT B (START)
15 A DC at supply voltage
EXITS C & D
8 A 250 V (voltage-free)
AUXILIARY OUTPUTS E,F,G,H
2 A DC at supply voltage
GENERATOR
VOLTAGE RANGE
15V - 333V AC (L-N)
FREQUENCY RANGE
3.5Hz to 75Hz
MAGNETIC SUSPENSION
VOLTAGE RANGE
+/- 0.5V to 70V
FREQUENCY RANGE
10,000Hz (maximum)
MEASURE
TOTAL
240mm x 181mm x 42mm
9.4" x 7.1" x 1.6"
PANEL CUTOUT
220mm x 160mm
8.7" x 6.3"
MAXIMUM PANEL THICKNESS
8mm
0.3"