Datakom DKG-317 Generator Manual and Remote Start Control Panel/Controller

Datakom DKG-317 Generator Manual and Remote Start Control Panel/Controller
Description:
The DKG-317 is a comprehensive generator control unit designed to start and stop the generator set both manually and remotely. Manual control is done using the push buttons on the front panel. Remote control is done via REMOTE START. The unit is available with MPU or CANBUS versions.
The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without additional transmitters. The unit can initiate modem calls and send SMS messages in case of fault conditions via external modems.
The unit provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations, operating sequences and motor types. All programs can be modified via the front panel push buttons and do not require an external device. The last 100 faults are stored in the event log file. The event log contains not only date-time information, but also a comprehensive list of measured generator parameters at the time the fault occurred. The WINDOWS-based RAINBOW program allows remote monitoring and control. The unit supports MODBUS protocol which enables communication with PLCs and building management systems. The MODBUS protocol is also supported via GSM and PSTN modems.
Measure:
Generator volts: L1-N, L2-N, L3-N
Generator volts: L1-L2, L2-L3, L3-L1
Generator amplifier: L1, L2, L3
Generator total kW
Generator total pf
Generator frequency
Engine speed
Battery voltage
Engine coolant temperature
Engine oil pressure Fuel level
Engine oil temperature
Specification:
Alternator voltage: 0 to 300 V-AC (Ph-N)
Generator frequency: 0-100 Hz.
DC supply range: 9.0 to 33.0 V-DC
Start interruption: survives 0 V for 100ms.
Typical standby current: 100 mA-DC
Maximum operating current: 250 mA-DC (Relay outputs open)
DC outputs: 10A @ 28V
Charging excitation: min 2 Watt
Magnetic pickup input: 0.5 – 30 V-AC.
Magnetic pickup frequency: 10 KHz max.
Current inputs: from CTs, .../5A. Max load 0.7VA per phase.
Analog input range: 0-5000 ohms.
Serial port: RS-232, 9600 baud, no parity, 1 stop bit
Operating temperature: -40°C (-40°F) to 70°C (158°F).
Storage temperature: -55°C (-67°F) to 80°C (176°F).
Maximum humidity: 95% non-condensing.
Dimensions: 172x134 x 46 mm (WxHxD)
Panel Cut-out Dimensions: 151x111 mm minimum.
Weight: 300g (approx.)
Case material: High temperature ABS/PC (UL94-V0)
IP protection: IP65 from the front panel, IP30 from the rear
Installation: Flat surface mount on Type 1 enclosure.
CE Reference standards for conformity:
EN 61010 (safety requirements)
EN 61326 (EMC requirements)
UL/CSA compliance: certificate #20110527-E314374
UL 508, edition 17
UL 2200, 1st edition.
UL 840 Edition 3
CSA C22.2 NO. 14 - Edition 10