36-48V 500A DC Motor Controller 1205M-5606 17721709 for Curtis
Replace part number: 1205M-5606, 1205M5606
Specification:
1205M-5606 is the latest. 48V / 500A / 0-5kΩ
Normal Battery Voltage (Volts): 36/48 (Two voltage settings are available. The voltage can be set to either 36 volts or 48 volts. By default, it is set to 48 volts, with an allowable operating range of 33-48V. If set to 36 volts, the allowable operating range is 25-36V). The buyer should confirm with the seller the battery system voltage and throttle type (0-5kΩ, 5k-0Ω or 0-5V).
By default, we will control the setting of 48V / 500A / 0-5kΩ.
1 minute current rating (amperes): 500
5 second boost current (amperes): 600
1 hour current rating (amperes): 175
Plug braking (A2 busbar): Yes
SPECIFICATIONS: 1205M CONTROLLER
Nominal Input Voltage: 36/48 V (The 1205M-5606 has two available battery voltage settings. The voltage can be set to either 36 volts or 48 volts.)
PWM operating frequency: 15 kHz
Electrical insulation to heat sink (min.): 500 V
KSI input current (no contactors connected): < 60 mA without programmer; < 130 mA with programmer
Logic input current: <1 mA
Status LED output current (max.): 2 mA
Throttle type: 2-wire 0 – 5kΩ, 2-wire 5kΩ – 0 or 0 – 5V
Ambient storage temperature range: -40°C to 85°C (-40°F to 185°F)
Operating ambient temp. range: -40°C to 50°C (-40°F to 122°F)
Package environmental rating: ISTA 2A; electronics sealed to IP65
Regulatory Compliance: Safety — Designed according to the requirements of EN 1175; EMC — Designed according to the requirements of EN 12895 and EN 61000.