Aftermarket Deep Sea DSE5120 Generator Controller Module Control Panel

Aftermarket Deep Sea DSE5120 Generator Controller Module Control Panel
See details:
Generator control unit 5120
The Model 5120 is an automatic mains failure control module and includes all the features of the BC5110 plus the ability to monitor the mains power supply. Upon detection of a mains failure, the module automatically starts the generator set. When mains power is restored, it instructs the generator to stop.
Dedicated outputs provide control of both the mains and the generator. This feature is combined with the built-in incoming mains supply.
Main features
1. microcomputer control
2. automatically activated, the shutdown
3. real-time display
4. visualization of police permit graphics
5. quick information display device
6. LED and LCD alarm indications
7. Programmable relay output
Control functions
1. Emergency parking control
2. Automatic car license plate
3. Start Delay Control
4. Start/Shutdown locally manually
5. Remote automatic start/stop
6. Preheat, pre-controlled oil
7. Refrigeration machine, parking for electricity
8. ATS switch control
View data
1. Generator speed
2. Battery voltage
3. Engine oil pressure
4. Engine water temperature
5. Generate unit output frequency for exchange
6. Generator set operating time
7. Load phase alternating current
8. Change phase voltage
Power supply: 8 to 35 Vdc continuous
Power-on dropout: Can survive 0 V for 50 mS, provided the power supply was at least 10 V before the output and the power returns to 5 V without the need for internal batteries.
Maximum current: Operation 320mA at 12V, 215mA at 24V; Standby 175mA at 12V, 95mA at 24V
Starter relay output: 16 Amp DC at supply voltage.
Fuel relay output: 16 Amp DC at supply voltage.
Auxiliary relay outputs: 5 Amp DC at supply voltage.
Charging error/excitation range 0 V to 35 V
Generator input range: 15V(ph-N) to 300V(ph-N) 3-phase 4-wire AC (+20%)
Generator input frequency: 50 - 60 Hz at rated engine speed (Minimum: 15V AC Ph-N)
Magnetic pickup voltage Input range: +/- 0.5 V to 70 V peak
Magnetic input frequency: 10,000 Hz (max) at rated motor speed
Operating temperature range: -30 to +70°C
Panel cutout: 220mm x 160mm ( 8.7” x 6.3”)